jewelry rings tutorials

DIY: Gem and Chain Ring (Inspired by Dannijo)

This project is (somewhat) inspired by the Harrison Ring by Dannijo, which is available at ShopZoeOnline.com for $155. I decided to make my own DIY statement ring with the same general concept as the $150+ original, using sew-on faceted gems.

I say “general” because the concept of my version would have been more similar to the original if my sew-on gems had more than 2 holes. However, 2 holes are the standard amount of holes in sew-on gems…so, we’ll just have to work with it. Making an exact copy would be kind of boring anyway!

Inspiration:


Harrison Ring

 

 
Supplies:
 
– Rectangle sew-on faceted gems (I got mine at Michael’s, 10/pk for $1.99)
– Chain, jump ring, jewelry pliers
– Strong glue, such as E6000
– Ring blank
– Wire (possibly!)


1) Connect the chain to one of the holes with a jump ring.

2) Wrap it around and connect a link of the chain to the next hole of the gem, using another jump ring.

 

3) Connect the end so that it wraps around the entire gem; trim if needed.

4) If there were multiple holes around the entire gem, more jump rings could be used to keep the chain in place. However, with only 2 holes in most sew-on gems, the chain will most likely be sliding every which way. I used some wire to weave in and out of the links, which kept the chain in place.

5) Granted, the chain is ON the gem instead of AROUND it, but I totally like it this way.
6) Glue the ring blank to the chained up gem. (If you’re using E6000, don’t forget to do this in a well-ventilated area & to let it dry for 24 hours!)


High End Cost: $155
DIY Cost: $2!

I really want to try this with some black faceted gems; hopefully I can find some with multiple holes. I’ll probably be coming back to this project in the near future!
 
 
Xo, Kirsten